Vacuum Tube Pre-Amplifier Kit

Lighthouse Electric

CLASSIC DESIGN THREE STAGE TUBE PREAMP KIT

STA1-LG Line Level Sensitivity

FEATURES:

Two channel (stereo), universal tube pre-amplifier kit
Volume, treble, bass and balance controls for each channel
High output voltage and low impedance cathode follower output
3 triodes per channel, six total

SOME APPLICATION EXAMPLES:

Drive your Solid State Stereo PA
Build a full vacuum tube amplifier
Build a two channel instrument pre-Amp
Experiment with your own design

SPECIFICATIONS:
Overall Gain: 5.6
Input Sensitivity: 0.7 - 2.5 V
Frequency Response: 25Hz - 50kHz (+/- 1.5dB)
Treble Regulation: +15dB ...-15dB
Bass Regulation: +16dB ...-15dB
Output Impedance: 400 Ohms
Supply Voltages: Plate 220 - 250 VDC/10mA,
Filament 12.6 V/600mA DC or AC
Vacuum Tubes: three 12AU7 (ECC82)

DIMENSIONS:
L 5.50" x W 4.00" x H 0.75"(w/o tubes)

PARTS INCLUDED:
Printed circuit board, all passive components, shielded wire, schematic, instructions, solder.
Not included are: enclosure, knobs, input/output jacks, mounting hardware.
Power supply and tubes are sold separately.

PRICES:

STA1-LG Kit only w/o tubes, $69.00

**$10.00 Savings** STA1-LG Kit and 115VAC SAPS1 Power Supply $ 128.00

12AU7/ECC82 tube set $30.00

STA1 PCB & Manual only, $12.00 ea.+ $3.00 S/H Total $15.00

Pay with Check

Home | Ordering Info | International Orders (except Canada) | Archives | Links

STA1-LG Kit only w/o tubes, $69.00
$10.00 Savings STA1-LG Kit and 115VAC SAPS1 Power Supply $ 128.00
12AU7/ECC82 tube set $30.00
STA1 PCB & Manual only, $12.00 ea.+ $3.00 S/H Total $15.00